Swimming Pool Cleaner

WQB

Our Submersible SWIMMING POOL CLEANER is a revolutionary way one can clean the swimming pool today. The concept of using an electric submersible pump connected to wide suction nozzle fitted with spring actuated Nylon Brush effectively removes muck accumulated on the pool and on the walls of pool.

SPECIAL COATS OF VARNISH

  • Motors windings are applied with 3 coats of Varnish . Thereafter end windings are applied
    with epoxy coating to arrive insulation thickness to 0.5mm (approx.. )

  • This gives the motor windings an excellent insulation value which protects the motor from
    condensed water that may appear from entrapped moisture during motor assembly, when
    the motors starts from cold conditions- particularly assembly during rainy season.

  • Three bimetallic switches are embedded in the windings which are connected to contactors
    magnetic coil in series which protects the motor from overloading

  • The motor rating selection is based on full open operation condition unless customer asks
    other wise . This makes our pump to take care of unknown site conditions & practically the
    motor does not get overloaded

RANGE OF OPERATION

  • Available in 1.5 ( 1 & 3 Phase ) & 2 HP Version

  • Discharge : 400 LPM & 600 LPM

  • Speed : 2900 RPM

  • Speed : 2900 RPM

  • Pump Performance are equivalent to WQM100 & M120NM

  • Supplied in Extruded Aluminum body

  • Sealing by single Mechanical seal with Face TC Vs TC with secondary inner Lip Seal
    in oil chamber

PROCESS OF OPERATION

Water is cleaned through SS strainer to tap large solid like stones and then filtered through double fine mesh filter bags to collect even the smallest particles leaving the re circulated water sparkling clean The light weight cleaner is both versatile and economical and can be used for applications Like:

  • Swimming pools in hotels ,resorts residential complexes

  • Fountains in Hotels

  • Garden Reservoirs

STANDARD SCOPE OF SUPPLY

  • 30 meter long PVC water proof cable

  • Sludge bag & protection bag

  • Extension Rod of 2.5 meter

  • Cable Float

ELECTRIC MOTOR DESIGN / DETAILS

MOTOR DESIGN

Water is cleaned through SS strainer to tap large solid like stones and then filtered through double fine mesh filter bags to collect even the smallest particles leaving the re circulated water sparkling clean The light weight cleaner is both versatile and economical and can be used for applications Like:

POWER SUPPLY

Motors are suitable 415 Volts +/- 6%, 3 Phase, 50Hz+/- 3% AC Supply. It is also available for any combination of voltage and frequency on special request.